691.MINERAL PROCESSING OF THE DOLOMITES FROM DEPOSITS IN THE REPUBLIC OF NORTH MACEDONIA

Authors

  • Arsoska Elena Faculty of Technology and Metallurgy, “Ss. Cyril and Methodius” University in Skopje Ruger Boskovic 16, Skopje, Republic of North Macedonia
  • Čankulovska-Tenovska Andrijana Faculty of Technology and Metallurgy, “Ss. Cyril and Methodius” University in Skopje Ruger Boskovic 16, Skopje, Republic of North Macedonia
  • Kostadinova Tajana Faculty of Technology and Metallurgy, “Ss. Cyril and Methodius” University in Skopje Ruger Boskovic 16, Skopje, Republic of North Macedonia
  • Reka Arianit Faculty of Natural Sciences and Mathematics, University of Tetovo, Str. Ilinden, nn. 1200 Tetovo, Republic of North Macedonia
  • Bogoevski Slobodan Faculty of Technology and Metallurgy, “Ss. Cyril and Methodius” University in Skopje Ruger Boskovic 16, Skopje, Republic of Macedonia
  • Boškovski Boško Faculty of Technology and Metallurgy, “Ss. Cyril and Methodius” University in Skopje Ruger Boskovic 16, Skopje, Republic of North Macedonia

DOI:

https://doi.org/10.55302/MESJ2543131a

Keywords:

dolomite, mineral processing, Čajle, Ogledalec, Suvodol

Abstract

Dolomites are used as a raw material in various industries such as construction, inorganic chemical technology, metallurgy, agriculture, etc. In the Northwestern Region of the Republic of North Macedonia, there are several deposits of dolomite that are exploited. In this research, the dolomites from the localities of Čajle, Ogledalec and Suvodol were examined. The aim of thе research is to define the mineral processing of the dolomite raw materials. The basic parameters of the grain size reduction were optimized, with a comparison between the deposits. Therefore, the dolomite raw materials were processed on a jaw crusher, a roller crusher and in a porcelain mill with balls. A wet sieve analysis was conducted to define the efficiency of size reduction. Various size fractions of grains were observed on a binocular microscope. The discussion of the obtained results defines the relation between material pressure strength and the efficiency of the grain size reduction process, as well as the electricity consumption.

Downloads

Published

24-06-2025